污染土壤的物化修复治理技术研究

污染土壤的修复治理过程中,物化技术以其快速高效的特点成为国内外研究的热点。本文通过对工程措施、玻璃化技术、热修复、电动力修复、光化学降解、化学淋洗、化学固定/稳定化、化学氧化以及联合修复等常见土壤物化治理技术进行了分析,探讨了各种工艺技术的性能及优缺点,旨在为我国土壤污染修复治理技术的选择提供参考。     

Toward rapid preparation of capillary columns for electrochromatography use

CEC is a high performance electrodriving liquid phase separation technique. It does not need complex and sophisticated high pressure instrumentation for nanoflow driving. This is attractive for parallel multicolumn analysis. To this end, high throughput methods for column preparation are needed to support the use of multiple columns. In this study, we directly used CEC mobile phase solution as the packing solvent, and realized rapid preparation of capillary columns based on a single particle fritting technology. The method presented high preparation throughput compared with other reported methods based on various fritting technologies. The single particle fritting approach promoted column preparation throughput to 1 column/h, including all the fritting, packing and conditioning steps. The rapidly prepared columns showed consistently high efficiency of up to 150 000 plates per meter, and usefulness in reversed phase CEC of neutral, charged and biomolecules. With standard peptides as the sample, excellent long term reproducibility (better than 0.8%RSD, ten days, for retention times) was observed.     

硅铝比对完全液相法制备的一步法二甲醚合成催化剂反应性能的影响

采用完全液相法制备了不同Si/Al摩尔比的浆状一步法二甲醚合成催化荆,在搅拌式反应釜中对其催化性能进行了评价.通过XRD,NH3-TPD-MS,H2-TPR和XPS等方法表征了催化剂的体相结构和表面性质.结果表明,完全液相法制备的CuZnSiAl催化剂在反应前其活性组分Cu主要以低价态存在,Cu晶粒大小是影响其活性的主...     

1,1-二(2,4,6-三硝基苯甲酰胺基)-2,2-硝基乙烯的合成

以1,1-二氨基-2,2-二硝基乙烯(FOX-7)和2,4,6-三硝基苯甲酰氯(TNBC)为原料反应合成得到了1,1-二(2,4,6-三硝基苯甲酰胺基)-2,2-二硝基乙烯,并通过单因素试验和正交试验方法,分别探讨了反应介质、缚酸剂、反应温度和反应时间等对产物产率的影响,得到适宜的工艺条件为:FOX-7与TNBC物质的量的比1∶2.4,以四氢呋喃(THF)为反应介质,N,N-二甲基甲酰胺(DMF)为缚酸剂,反应温度0℃,反应时间48 h,产率可达94％.采用紫外可见光谱(UV-Vis)、核磁共振氢谱(1H NMR)、核磁共振碳谱(13C NMR)、红外光谱(FT-IR)、质谱(MS)及元素分析等对产物的结构进行了表征.利用差热分析仪对产物热稳定性进行了研究,结果表明,产物在空气中分解峰值温度为167℃,理论计算爆速为7.434km· s-1,爆压为23.67 GPa.     

天然纤维预处理技术研究进展

天然纤维预处理是影响天然纤维强化生物复合材料的关键因素。文章首先从天然纤维的物理特性、化学成分和吸湿特性三方面对纤维性能进行了陈述,针对这些性能综述了国内外常用的天然纤维预处理方法,重点介绍了碱化处理、硅烷处理、高锰酸盐处理和过氧化物处理等化学方法,并对比了天然纤维经常用化学改性方法处理后产生的结果;其次介绍了机械加工...     

铁皮石斛中石斛多糖与石斛碱的纤维素酶法提取研究

本文利用纤维素酶法联合提取铁皮石斛中的多糖与生物碱,通过单因素实验研究酶用量、酶解时间、酶解温度和酶解pH对石斛多糖与生物碱收率的影响.实验结果表明,在本实验范围内,最佳提取工艺为:纤维素酶用量为原料的0.6%(质量分数),酶解时间为1.5h,酶解温度为50℃,酶解pH值等于5.0.在此工艺下,石斛碱的收率达19%,石...     

超声波辅助提取柿子树叶单宁的研究

以70%的丙酮溶液为提取溶剂,采用超声波辅助提取野柿叶中的单宁,考察了超声波的功率、提取温度、提取时间等因素对单宁提取量的影响.采用响应面法对提取条件进行优化,并建立了二次回归模型.实验结果显示:当提取温度为52℃、超声波功率为80 W、提取时间为42 min,在此条件下单宁的提取量为203.15 mr/g,比无超声波...     

Applying magnetic soft mold imprint technology with ultraviolet light‐emitting‐diode array on the fabrication of microlens arrays

This study proposed a novel technology, which uses exposed technology with ultraviolet light‐emitting‐diode (UV‐LED) arrays and the polydimethylsiloxane (PDMS) magnetic flexible soft mold imprint technology, to develop exposed equipments with UV‐LED arrays. This study used magnetic soft mold imprint technology to replicate the structure of microlens, providing a more effective alternative for imprint technology and application. The measurement results showed that PDMS with magnetic iron powder can precisely cast mold to replicate the structures of microlens. Electromagnetic plates were used to control even imprinting with magnetic force, in order to fill the mold of micro‐structure of the photo‐resist. Magnetic iron powder was added to PDMS to produce composite material, which can effectively avoid the transformation of pure PDMS during soft mold imprinting, and increase mechanical strength. Magnetic PDMS soft mold is easy to make, and the casting time is short, so that costs can be effectively reduced. Also with advantages of less free energy on its surface, and unlikely to adhere to the photo‐resist during imprinting, it can be combined with electromagnetic plates evenly to control the magnetic soft mold. This imprinting technology is a big advantage to the production process of micro‐structures during imprinting. Copyright © 2009 John Wiley & Sons, Ltd.     

光纤传输速度干涉仪

介绍一种用多模光纤传输入射和反射激光的速度干涉仪，阐述了这种干涉仪的原理和结构，并将其与传统的速度干涉仪进行比较。给出了用这种干涉仪测量电爆管的弹丸速度和钨样品在铁飞片冲击压缩下的自由面速度的实验装置和结果。文中最后总结了这种干涉仪的性能及特点。     

稀有气体卤化物准分子激光器工作气体实时补给技术

为延长稀有气体卤化物准分子激光器工作气体使用寿命,在原有供气设备基础上增加了工作气体实时补给技术.该技术采用FPGA控制系统将逐步提高放电电压、补充卤素气体和更换部分混合气体等操作有效组合起来.随着激光脉冲能量的下降,逐步提高放电电压;当放电电压达到最大值时,开始补充卤素气体,并恢复放电电压;当补充卤素气体效果不明显时,更换部分混合工作气体.将该技术应用于医用型ArF准分子激光器中进行实验研究,结果表明:在没有使用工作气体实时补给技术的情况下,激光器累计工作14.38 h后,输出单脉冲激光能量下降了17.2％;采用工作气体实时补给技术后,激光器输出能量下降速率明显降低,累计工作14.38 h,其单脉冲能量下降率能控制在3％范围内.因此,采用该技术可延长激光器工作气体的使用寿命、提高输出激光能量稳定性、减少停机次数并降低运行成本.